$ hinv -mv
Location: /hw/node
      PM20300MHZ Board: barcode HRJ285     part 030-1356-001 rev  J
Location: /hw/node/xtalk/15
            IP30 Board: barcode KJV614     part 030-1467-001 rev  D
Location: /hw/node/xtalk/15/pci/2
             FP1 Board: barcode KKC231     part 030-0891-003 rev  G
    PWR.SPPLY.ER Board: barcode AAE0010273 part 060-0035-002 rev  A
Location: /hw/node/xtalk/11
           ODY32 Board: barcode LDE148     part 030-1403-003 rev  B
2 300 MHZ IP30 Processors
Heart ASIC: Revision F
CPU: MIPS R12000 Processor Chip Revision: 2.3
FPU: MIPS R12010 Floating Point Chip Revision: 0.0
Main memory size: 1536 Mbytes
Xbow ASIC: Revision 1.4
Instruction cache size: 32 Kbytes
Data cache size: 32 Kbytes
Secondary unified instruction/data cache size: 2 Mbytes
Integral SCSI controller 0: Version QL1040B (rev. 2), single ended
  Disk drive: unit 1 on SCSI controller 0 (unit 1)
  Disk drive: unit 2 on SCSI controller 0 (unit 2)
Integral SCSI controller 1: Version QL1040B (rev. 2), single ended
  CDROM: unit 6 on SCSI controller 1
IOC3/IOC4 serial port: tty1
IOC3/IOC4 serial port: tty2
IOC3 parallel port: plp1
Graphics board: V6
Integral Fast Ethernet: ef0, version 1, pci 2
Iris Audio Processor: version RAD revision 12.0, number 1
  PCI Adapter ID (vendor 0x10a9, device 0x0003) PCI slot 2
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 0
  PCI Adapter ID (vendor 0x1077, device 0x1020) PCI slot 1
  PCI Adapter ID (vendor 0x10a9, device 0x0005) PCI slot 3

$ /usr/gfx/gfxinfo
Graphics board 0 is "ODYSSEY" graphics.
	Managed (":0.0") 1280x1024 
	BUZZ version A.1
	PB&J version 1
	32MB memory
		Banks: 2, CAS latency: 3
	 Monitor 0 type: Unknown
	Channel 0:
	 Origin = (0,0)
	 Video Output: 1280 pixels, 1024 lines, 96.04Hz (1280x1024_96)